![]() ![]() Confirm whether the audio is sent to the audio system when you launched any of the built-in internet apps on the TV.Switching to Audio System appears on the TV screen when you power on the audio system.Switching to TV speakers appears on the TV screen when you power off the audio system.To test whether the CEC function of the audio system works, check the following:.Set the TV speaker settings to Audio System.Make sure the connected device is enabled on the Bravia sync list of the TV.For further information, refer to the TV's manual. Make sure the Bravia sync settings of the TV is set to On.Make sure the HDMI Control settings on the audio system is set to On.To verify the location of the ARC ports, check your manuals. Connect the HDMI cable to the ARC ports on both devices.Connect the HDMI cable from HDMI output on your audio system to the HDMI input on your TV.Note: When restarting with the remote or menu, the TV will automatically power off and back on after a short time. Perform a power reset or restart of the TV. ![]() Shipping of the smartest converter solution for interoperability between any HDMI sources and eARC sound systems has now started. Disconnect all HDMI devices from your TV and the audio system. World First eARC HDMI2.1 adapter Hdfury Arcana allows ANY HDMI source FULL AUDIO to ANY eARC sound system for up to Dolby Atmos, Dolby TrueHD, Dolby MAT Atmos, DTS-X, DTS-HD Master Audio, and older formats.If model-specific information is needed to perform a step, check your device manual. Check if the issue is resolved after you try each step. If you observe any of the issues mentioned above, perform the steps below to clear the HDMI Lockup from either your audio system or TV. ![]() Neither your TV, nor the audio system power on after the device connected to your audio system is powered on.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |